New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Long Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Windows & Doors in Norwalk, CA | Juniper Windows Long Beach
We provide independent ES Windows service across Norwalk, from single-pane retrofits in Crestwood to hurricane-rated slider repairs near the 605. What makes our ES Windows work different here is simple: we know how Norwalk’s clay soil and Santa Ana winds beat up these specific aluminum frames, and we fix them without pushing a full replacement when a repair makes more sense. Juniper Windows Long Beach has been pulling failed ES units apart in LA basin tract homes for years, and we bring that bench knowledge to every Norwalk job. Call (562) 317-8865 for a free estimate.
Why Norwalk Residents Choose Us for ES Windows Service
Most companies offering Window Replacement in Norwalk see an ES Windows unit with a fogged pane or a seized roller and immediately quote a whole new window. We take a different route. Sean Mackey, our owner and lead installer, spent over a decade measuring and framing windows across Long Beach and the surrounding basin, including plenty of jobs where older homes demanded careful attention to rough opening size. That experience carries over. We know which ES Windows hardware is still available from distributors, which extruded profiles are discontinued, and when a $200 roller assembly beats a $900 sash replacement. For Norwalk homeowners with mid-century tract homes, that repair-first mindset saves real money. We are independent ES Windows specialists, not a manufacturer-authorized dealer. Our knowledge comes from disassembling failed units in Norwalk’s dust-heavy air, not from a factory training manual.
Common ES Windows Windows & Doors Problems We Solve in Norwalk
- Corrosion pitting on aluminum frames. Norwalk’s dry summers and Santa Ana winds push fine dust against window frames constantly. On ES aluminum frames, that dust settles into weep holes and screw bosses, and over time the powder coating breaks down and pitting starts. We catch it early, treat with zinc-chromate primer, and reseal before the frame perforates.
- Fogged insulating glass units (IGUs). ES thermoplastic spacer seals start failing after 8 – 12 years of Norwalk heat cycling. When you see interior fogging that won’t clear, the seal is gone. We replace the IGU or rebuild the sash, depending on which ES series you have.
- Slider track wear and roller seizure. The ES 900 Series horizontal slider is everywhere in Norwalk, and clay soil settlement shifts the rough opening out of square. Rollers grind, tracks wear, and eventually the sash sticks or falls out of track. We square the opening and install rollers rated for the weight of your panel.
- Multi-point lock misalignment. ES hurricane-rated sliders depend on precise lock-to-frame alignment. Norwalk’s soil movement knocks that alignment off, and you get air and water blowing through during Santa Ana gusts. We reset the hardware geometry rather than masking it with thicker weatherstripping.
- Annealed glass in pre-code locations. Many original ES installations from the 1980s and 1990s in Norwalk put annealed glass next to doors and within 24 inches of the floor. That glass shatters into big shards, and it predates the current tempered glass code. We flag it on every service call and make the safety upgrade part of the quote.
ES Windows Service in Norwalk: What Local Conditions Mean for Your Equipment
Here’s a Norwalk-specific fact most window companies never bring up: the city’s building code requires tempered glass in all doors and windows within 24 inches of a door, and many original ES installations from the 1980s and 1990s in the Crestwood tract predate that rule. Our retrofits routinely replace annealed lites that would shatter into dangerous shards. That’s not a generic window problem. It’s a specific code-compliance and safety issue tied to when Norwalk’s housing stock was built. The practical takeaway for ES Windows owners: if your slider or fixed pane sits close to a door and the glass has sharp edges when it breaks, it’s almost certainly not tempered, and it needs to be. We catch this during Window Installation in Norwalk projects and horizontal roller window repairs, and we build the upgrade into the written quote so there are no surprises later. This is one of the most common findings on ES equipment in Norwalk’s older tracts, and it’s exactly the kind of thing that separates a real local ES specialist from a rep who’s never looked at a 1992 unit in your neighborhood.
ES Windows Models & Products We Service in Norwalk
We work on the full range of ES Windows lines installed across Norwalk, including the 900 Series horizontal slider, the 700 Series single hung, the 500 Series fixed or picture window, and the H1 hurricane impact slider. Our parts approach is honest about the market: where OEM ES rollers, locks, and weatherstripping are still available through distributors, we source them. Where extruded profiles have been discontinued, we substitute high-grade aftermarket parts that match the original track and finish. Given ES’s thermally broken aluminum design, we often recommend frame repair over full replacement when the glass is intact and only the seals have failed. That’s not a generic answer. It’s the answer that fits ES Windows specifically, and it’s the one that keeps Norwalk homeowners from paying for a new window they don’t need.
ES Windows Service Pricing in Norwalk
Ballpark prices for ES Windows service in Norwalk: roller replacement on an ES 900 Series slider runs $180 – $320 per panel depending on sash weight. IGU replacement on a 700 Series single hung typically lands between $220 and $420 per lite. Full weatherstripping replacement on a slider or hung unit is $140 – $280 per window. Multi-point lock rebuilds start around $190 and scale with the number of lock points. These are written line-item quotes from our ES Windows sales & service team, and every job gets a fixed price before any work begins. Need an exact number? Call (562) 317-8865 and schedule a free estimate. We’ll come through Norwalk service area neighborhoods with the parts on the truck, not a 45-minute drive back to the shop.
Serving Norwalk, CA - Our Local Coverage Area
We’re based in the Norwalk area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ES Windows Windows & Doors in Norwalk
Clay soil settlement shifts your rough opening out of square, and summer heat expands the aluminum frame just enough to amplify the misalignment. The rollers bind and the rollers grind. The fix is squaring the opening with stainless shims and replacing worn roller assemblies, not forcing the sash. Call (562) 317-8865 if you’re feeling that grind today.
You can replace just the IGU in most 700 Series sashes when the frame is still square and the hardware is tight. We quote the glass replacement separately from a full sash rebuild, and a free estimate tells you which one makes sense for your window.
Expect 8 – 12 years from ES weatherstripping in Norwalk’s sun and wind. When you see daylight at the meeting rail, feel air movement on a calm day, or notice dust accumulating inside the track, the seal is gone. We replace it with dual-durometer bulb seal that outlasts the original. Call (562) 317-8865 for a quote with exact pricing.
Usually both. The frame shifts slightly when clay soil moves, and the multi-point lock loses its alignment. We reset the lock geometry and often re-shim the frame rather than replacing the lock outright. A free estimate will tell you which it is on your unit.
Many are not. Norwalk code now requires tempered glass in windows within 24 inches of a door, and many ES units installed before that rule used annealed glass. If you have original 1990s ES glass near a door, we recommend replacing those lites with tempered units during any service visit. We’ll flag it in the written quote.
Service Areas Near Norwalk
Our ES Windows service covers Norwalk and the surrounding area including Long Beach, Garden Grove, Carson, Buena Park, and Bellflower. If you’re in a neighboring city with the same mid-century ES frames, we can help. See ES Windows service in Garden Grove or ES Windows service in Long Beach for location-specific details.
Book Your ES Windows Service in Norwalk Today
Sean Mackey and our team are ready to diagnose and repair your ES Windows equipment with a written quote before work starts. Call (562) 317-8865 now for a free estimate. We’ll bring the right parts for your Norwalk home, a live arrival time you can track, and a price that doesn’t change when we show up.
Written by Sean Mackey, Owner & Lead Installer at Juniper Windows Long Beach, serving Norwalk since 2001.
Six Reasons Homeowners Choose Juniper Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.