New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Long Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Long Beach, CA | Juniper Windows Long Beach
We provide independent Mr-Glass window and door service across Long Beach, from downtown lofts to Naples Island bungalows. The one thing that sets our Mr-Glass work apart here: we know salt air. Long Beach’s coastal moisture attacks hinges, rollers, and seals in ways you won’t see in Lakewood or Cerritos, and our repair approach is built around that reality. Call (562) 317-8865 for a free estimate on any Mr-Glass window or door.
Why Long Beach Residents Choose Us for Mr-Glass Service
We’ve worked on Mr-Glass windows and doors in Long Beach long enough to know which models hold up near the water and which ones need extra attention. Our founder, Sean Mackey, grew up in Los Angeles and learned building construction hands-on at Los Angeles Trade-Technical College. He’s spent well over a decade on Window Installation - Long Beach projects, measuring, framing, and fitting windows and doors across the city, including plenty of jobs in Belmont Shore where older homes demand careful attention to rough opening size and weatherproofing details. That experience shapes how we approach every Mr-Glass repair.
We’re an independent provider, which means we’re not bound by manufacturer repair restrictions. When a Mr-Glass window needs a genuine OEM part, we order it. When an aftermarket stainless steel roller will outlast the original in salt air, we tell you that instead. For broader context on what we do, see our Mr-Glass sales & service overview. Every visit includes a written price before work starts, and our techs arrive in uniform with background checks already done.
Common Mr-Glass Windows & Doors Problems We Solve in Long Beach
- Salt air pitting on brass and zinc hardware. Original Mr-Glass wood windows in Naples and Belmont Shore often have brass or zinc locks and hinges that the ocean air has eaten into. Sashes stick, locks snap off, and the window won’t stay closed. We replace the hardware with marine-grade stainless when possible, then adjust the sash so it seats cleanly.
- Fogging between dual-pane glass. Mr-Glass vinyl windows with broken seals fog up after years of direct afternoon sun hitting the glass, followed by cool marine air overnight. That thermal cycling stresses the seal until it fails. We replace the insulated glass unit rather than the whole window, which saves hundreds on most models.
- Corroded aluminum and steel sliding door frames. Mr-Glass sliding doors in Long Beach’s coastal zone develop rough tracks and pitted frames. Rollers grind against the corrosion until they seize. We clean or replace tracks, install stainless rollers, and the door glides again.
- Rot and warping on wood Mr-Glass frames. Older Long Beach bungalows, especially Craftsman homes with stucco exteriors, hold moisture against the sill. That rots wood window frames from the bottom up. We repair or rebuild sills and jambs, preserving the original look where possible.
- Stuck or noisy 3-Lite sliding panels. Mr-Glass 7900 Series doors with three panels are common in mid-century Long Beach homes. When the center panel’s roller assembly fails, the whole door binds. We replace all rollers on the panel and realign the track so it stops fighting you.
Mr-Glass Service in Long Beach: What Local Conditions Mean for Your Equipment
Here’s something you won’t hear from a contractor who doesn’t work the coast regularly. On Naples Island, many Mr-Glass windows and doors are fitted with marine-grade stainless steel hinges specifically to fight the salt air. That’s the right material for Long Beach. But even marine-grade stainless shows rust streaks if it isn’t washed regularly with fresh water. Salt deposits sit on the surface, break down the protective oxide layer, and eventually pit the metal. Our techs always check for those rust streaks before lubricating or replacing tracks, because if they just spray lubricant over crusted salt, the hinge will bind again in a few months. We wash the hardware, inspect for pitting, then decide if the part should be saved or swapped. That one habit saves Long Beach Mr-Glass owners a lot of repeat service calls. For everything else we cover across the city, check our Long Beach service area page.
Mr-Glass Models & Products We Service in Long Beach
We service the full Mr-Glass lineup that shows up in Long Beach homes: the 7600 Series Vinyl Single Hung, 7700 Series Vinyl Horizontal Roller, 7800 Series Vinyl Casement, and 7900 Series Vinyl 3-Lite Sliding. We also work on Mr-Glass French and double doors, plus 3-panel sliding and horizontal roller configurations from older product generations.
Our parts approach is straightforward. Genuine Mr-Glass OEM parts go in when the fit demands it and the part is still made. For older or discontinued models, we use high-quality aftermarket seals, rollers, and hardware that often hold up better in Long Beach salt air than the originals did. We stock common rollers, weatherstripping, and hardware locally so most Mr-Glass repairs in Long Beach don’t wait on a shipment.
Mr-Glass Service Pricing in Long Beach
Most Mr-Glass repairs in Long Beach fall between $150 and $450 depending on the part and how much corrosion we’re dealing with. Here’s a breakdown of what you can expect:
- Roller replacement on a sliding door or window: $150 – $300 per panel, including stainless steel rollers and track cleaning.
- Insulated glass unit replacement for fogged Mr-Glass windows: $250 – $600 per sash, depending on size and glass package.
- Hardware replacement (locks, hinges, handles) with marine-grade stainless: $80 – $220 per window or door.
- Wood sill or jamb repair on Mr-Glass wood windows: $200 – $500 depending on the extent of rot.
- Full track replacement on a corroded Mr-Glass sliding door: $350 – $700 including new rollers and weatherstripping.
These are honest ranges, not teaser prices. Every estimate is written and covers parts, labor, and cleanup before we start. Call (562) 317-8865 for an exact quote on your Mr-Glass window or door.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Long Beach
Yes, and this is one of our most common Long Beach repairs. The fix is usually replacing the seized rollers with stainless steel ones, cleaning and polishing the track, and installing new marine-grade weatherstripping. We only recommend full door replacement when the frame itself is so corroded it’s losing structural integrity. Call (562) 317-8865 and we’ll assess it during a free estimate.
In most cases, yes. We cut out the rotted section of the sill or jamb, splice in new wood that matches the profile, and re-seal the frame so moisture can’t keep working its way in. For historic district homes in Long Beach, preserving the original frame is often required by local preservation rules anyway, and we’d rather honor that than push a Window Replacement - Long Beach. The repair usually costs $200 – $500 depending on how far the rot spread.
The fogging means the seal between the two panes has failed, letting moisture inside. In Long Beach, this happens faster near the coast because salt-laden air and big temperature swings between afternoon sun and cool evenings stress the seal. You can replace just the insulated glass unit, or IGU, without replacing the whole window frame. That typically runs $250 – $600 per sash. Call (562) 317-8865 for a written quote on your specific window size.
Every three to four months is a good rhythm for Long Beach homes within a mile or two of the water. A quick rinse with fresh water and a wipe-down of hinges, tracks, and rollers prevents salt buildup from pitting the metal. It takes ten minutes per window and saves you the cost of premature hardware replacement. If you’re already seeing rust streaks, call us and we’ll clean and assess before any damage gets worse.
Yes. Insert replacements fit inside your existing frames, so the exterior trim and sightlines stay nearly identical to the original windows. For Long Beach Craftsman homes in historic districts, this is often the best option because the original character of the house stays intact while you get modern glass and seals. We’ll show you samples before we order anything, and the written price covers the full job.
Service Areas Near Long Beach
Our Mr-Glass service in Norwalk covers neighbors to the north, and we also serve the Mr-Glass service in Garden Grove area for customers further inland. Closer to home, we regularly work in Carson, Bellflower, and Buena Park, and throughout Long Beach neighborhoods from Naples to Bixby Knolls to Belmont Shore.
Book Your Mr-Glass Service in Long Beach Today
If your Mr-Glass window or door is sticking, fogging, or showing rust, don’t wait for the salt air to make it worse. Call (562) 317-8865 and we’ll get you a free estimate, a written price, and a real person on the phone.
Written by Sean Mackey, Owner at Juniper Windows Long Beach, serving Long Beach since 2001.
Six Reasons Homeowners Choose Juniper Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.