New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Long Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Window Installation: The Long Beach Owner’s Guide
If your PGT window is fogged, drafty, or the sash won’t stay up, we install replacement PGT window units throughout Long Beach for $450 to $1,350 per window installed, depending on size, series, and glass package. Most owners call us after noticing condensation between the panes that won’t wipe away, a crank that spins without moving the sash, or a window that suddenly takes two hands to open. If you already have the replacement unit, we’ll install it. If you don’t, we match the original PGT spec, order the right window, and handle the full swap. Call (562) 317-8865 for a written quote before anything gets ordered.
Which PGT Models This Applies To
PGT builds three window families you’ll find in Long Beach homes: the WinGuard impact-rated line, the Spectrum vinyl series, and the older Architectural aluminum series still sitting in many Belmont Shore and Naples Island houses from the 1990s. Each one uses different frame depths, glass thickness, and hardware, and the part numbers don’t swap across them. The fastest way to identify yours is the PGT sticker on the head jamb or the side rail – it lists the series, glass type, and a manufacturing date code. If that sticker is gone, measure the visible glass width and the frame depth, and we can match it from there.
A key compatibility gotcha: WinGuard windows are impact-rated, not just impact-glass. The frame, the glass, and the anchoring system are all engineered together. You can’t drop a WinGuard sash into a standard vinyl frame and expect it to hold in a storm. If you’re replacing one unit in a multi-window opening, the replacement should match the original glazing package or the whole opening’s performance rating is compromised. We stock genuine PGT hardware and seals on the truck, and for full window replacement we source either OEM PGT or a quality equivalent that matches the original U-factor and sightlines, depending on what the home needs and what the 365-Day Done Right Promise requires.
Signs Your PGT Window Installation Is Failing
- Condensation between the glass panes. The desiccant inside the insulating glass unit has failed, which means the sealed unit is done. No repair fixes this – the glass pack gets replaced. In Long Beach’s marine layer, this shows up faster on west-facing windows that get morning fog and afternoon sun cycles.
- Crank operator spins without moving the sash. The gear inside the operator has stripped or the arm has snapped at the pivot. This is a hardware replacement, and PGT uses specific operator arms by generation – older Architectural series arms don’t fit the newer Spectrum units.
- Window won’t lock, or the lock feels sloppy. The sash has settled or the keeper is out of alignment. On older aluminum frames, the keepers corrode in coastal air and need replacement, not adjustment.
- Drafts around the frame even when closed. Weatherstripping has compressed or dry-rotted, or the original install wasn’t shimmed square. We see this often in Long Beach homes on Naples and the Peninsula, where salt air accelerates seal breakdown.
- Sash sticks, chatters, or drops when opened. The balance system or pivot bar is failing. For WinGuard windows, the heavier impact-rated sash wears balance hardware faster than standard vinyl, because the sash weighs more.
Replacement Cost & What’s Included
In Long Beach, installed PGT window replacement runs:
- Standard vinyl single-hung or casement: $450 to $750 per window
- WinGuard impact-rated unit: $750 to $1,350 per window, depending on size
- Hardware-only repair (crank operator, lock, balance): $95 to $220 per window
- Insulated glass replacement in existing frame: $250 to $480 per glass pack
Every quote is a written, line-item price before any work starts – no “we found rot and the price changed” phone call mid-job. The price includes the new unit or part, haul-off of the old window or glass, and cleanup. Our work is covered by the 365-Day Done Right Promise: 365 days, parts and labor, in writing. If a repair fails within the year, the second visit is free. Sean Mackey’s install crews carry fall-protection and flashing knowledge specific to Long Beach’s stucco-and-siding mix, which matters more than homeowners expect when a window comes out and the rough opening tells its own story.
DIY or Call Us?
Some things are safe to check yourself: look for the PGT sticker, photograph the lock style and crank shape, and measure the visible glass. That information helps us quote accurately over the phone. But pulling a window frame, especially a WinGuard impact unit, involves heavy lifting, sealing, and flashing detail that can damage the rough opening if done wrong. We’ve removed windows in Long Beach where the previous DIY caulk job let water run down the rough sill and into the sole plate for years. For full window or glass replacement, we recommend a trained installer – the same way we’d recommend a professional for any work that involves removing a weather barrier or lifting heavy impact glass. If you’re on the fence, call (562) 317-8865 and we’ll tell you honestly whether the job is small enough to handle yourself or worth having us do.
FAQs
Vinyl PGT windows typically last 20 to 30 years in Long Beach’s coastal climate, while aluminum Architectural series frames can go longer if the finish is maintained, but their original seals rarely survive past 15 years in salt air. Insulated glass units often fail in the 10 to 18 year range here because of fog cycles and temperature swings.
Hardware, balances, and weatherstripping can usually be repaired. A failed insulated glass unit cannot be “fixed” – the glass pack gets replaced, which we do without disturbing the surrounding frame. Call (562) 317-8865 and we’ll tell you which one your issue falls into.
Most single-window swaps take two to four hours from arrival to cleanup. A full-home replacement of ten or more windows typically runs two to three days depending on access and whether we’re matching stucco returns.
We carry PGT-compatible balances, crank operators, locks, and weatherstripping on our trucks for same-day hardware repairs in Long Beach. Full replacement windows are ordered to exact spec and arrive within two to three weeks for standard units, longer for custom WinGuard sizes. We also stock parts for CGI, CWS, and ES Windows.
Call Juniper Windows Long Beach
You’ll get a live person on the phone, a written price before anything is ordered, and a real arrival time you can track – that’s The Relay Standard, and it’s how we work on every PGT window job in Long Beach. Good windows don’t whisper – they seal, insulate, and stay quiet for twenty years. Call (562) 317-8865 for your free estimate.
Written by Sean Mackey, Owner & Lead Installer, Juniper Windows Long Beach at Juniper Windows Long Beach, serving Long Beach and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.