New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Long Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Door Installation: The Long Beach Owner’s Guide
PGT door installation in Long Beach typically runs $450 to $1,850 for parts and labor, and most swaps take us 2 to 4 hours once we’re on site. The price depends on whether we’re replacing a roller assembly, a lock set, weatherstripping, or an entire impact-rated panel. Owners usually find us the same way: a door that used to glide now drags, a lock that sticks, or daylight sneaking through a gap that wasn’t there last summer.
We stock PGT-compatible hardware on our trucks, so in many Long Beach neighborhoods, from Naples to Bixby Knolls, we can diagnose the failure and complete the install in a single visit. If you’re noticing resistance when you slide the door, condensation between the glass panes, or a handle that needs a firm yank, keep reading. This page is built to answer exactly what you’re dealing with and what it should cost.
Which PGT Models This Applies To
PGT’s Long Beach footprint skews heavily toward the WinGuard and Premier lines, both impact-rated sliding glass doors and hinged French doors built for coastal wind zones. The 5500 and 7700 series sliders are the most common we touch, though we regularly service the 400 series and PGT’s Vinyl horizontal rollers as well. Each series uses slightly different roller hardware, track profiles, and lock geometry, so matching the part to the specific model matters more than most homeowners expect.
Here’s the gotcha: PGT doesn’t stamp model numbers in obvious places on older doors. The fastest way to identify your door is to look at the corner of the glass for a silkscreened etching, or check the top track channel for a small sticker. If neither is there, a photo of the roller assembly and a measurement of the stile width usually gets us there. We offer OEM PGT parts and quality aftermarket equivalents from ES Windows and Mr-Glass, and we’ll tell you honestly when aftermarket makes more sense for a door that’s ten years into a coastal weather cycle.
Signs Your PGT Door Installation Is Failing
- The door drags or grooves in the track. Sand and salt air in Long Beach eat roller bearings faster than inland. Once the bearings flatten, the roller housing scrapes the track and you feel it in your wrist.
- You can see daylight or feel a draft at the head or sill. This usually means the weatherstripping has compressed beyond recovery or the panel has settled out of square. In Belmont Shore, we see this on homes where the original rough opening shifted slightly over decades.
- The lock won’t throw without slamming the door first. Misalignment between the keeper and the latch is the culprit most of the time. It starts as an annoyance, then becomes a security issue if you can’t secure the door at night.
- Condensation or fog between the glass panes. That’s a failed insulated glass unit seal. You’re not going to fix that with a wipe-down, and it only gets worse as temperature swings pull more moisture in.
- The handle feels loose or spins without engaging. PGT handles use a spindle that can strip over time, especially on doors that get heavy daily use from kids and pets. A new handle set usually solves it in under an hour.
Replacement Cost & What’s Included
Here’s the straight pricing for Long Beach. A roller assembly replacement runs $450 to $750 installed, including both top and bottom sets and any necessary track cleanup. A new PGT-compatible locking handle set is $275 to $475. Weatherstripping and sill threshold work lands between $300 and $600 depending on how much of the frame needs re-sealing. A full insulated glass unit replacement for a PGT panel starts at $850 and can go to $1,850 for larger impact-rated lites.
| Service | Installed Price Range |
|---|---|
| Roller assembly replacement (sliding door) | $450 – $750 |
| Lock and handle set | $275 – $475 |
| Weatherstripping and threshold re-seal | $300 – $600 |
| Insulated glass unit replacement | $850 – $1,850 |
Every quote is written before we touch a screwdriver. The number you get is the number you pay, no change orders, no “we found something else” surprises. Our work is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right for a full year, parts and labor, in writing.
DIY or Call Us?
One honest warning up front: PGT sliding door panels are heavy. A standard WinGuard panel can weigh 250 pounds or more, and impact-rated glass adds significant heft. Removing and re-setting a panel without proper lifting technique or the right floor rollers is how people throw out a back or shatter a panel. That’s not a scare tactic, it’s just the physical reality we’ve seen too many weekends go sideways.
What you can safely do before calling us: inspect the track for debris, check the weatherstripping for visible gaps, and note whether the door behaves differently in the morning versus the afternoon. That diagnostic detail helps us bring the right part on the first trip. If the panel needs to come out, call us at (562) 317-8865. We’d rather spend twenty minutes explaining your options than read about your Saturday afternoon in an urgent care waiting room.
FAQs
Coastal conditions matter here. A properly installed PGT door with regular track maintenance should give you 15 to 20 years of reliable service in Long Beach. The hardware is the exception: rollers and locks typically need attention every 7 to 10 years because salt air and fine sand from our beaches accelerate wear. Call (562) 317-8865 if your door is hitting that age and you’re starting to feel drag or see gaps.
Yes, in most cases. Rollers, locks, weatherstripping, and even individual glass units can be swapped without replacing the whole door. Full replacement only makes sense when the frame itself is warped, the track is corroded through, or the panel has structural water damage. We’ll tell you which path makes sense for your specific door after a look, and you’ll get that assessment in writing before committing.
A roller replacement or lock swap usually takes 2 to 4 hours on site. A full glass unit replacement can take a morning, including removing the old unit, setting the new one, and re-sealing the frame. We’ll give you a firm time estimate when you book, along with a live arrival time you can track, so you’re not stuck waiting around all day.
We keep the most common PGT roller assemblies, lock sets, and weatherstripping profiles on our trucks, so we can often complete the install the same day. Less common items, like a specific insulated glass unit for an older PGT series, may take 3 to 5 business days to source from the manufacturer or a distributor. Either way, you’ll know the timeline before we schedule the job.
Time to Fix That Door?
If your PGT door is dragging, sticking, leaking air, or just not securing the way it should, let’s get it handled. Call Juniper Windows Long Beach at (562) 317-8865 and we’ll talk through what you’re seeing, give you a straight price range over the phone, and schedule a free estimate. You’ll get a written quote before any work starts, a live arrival time you can track, and before-and-after photos of the job when it’s done. That’s how we work. Call (562) 317-8865 now.
Written by Sean Mackey, Owner & Lead Installer, Juniper Windows Long Beach at Juniper Windows Long Beach, serving Long Beach and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.