New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Long Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Window Replacement: The Long Beach Owner’s Guide
We stock and install ECO Window Systems-compatible replacement windows throughout Long Beach, with most single-window replacements running between $850 and $2,400 installed depending on size, frame condition, and glazing package. Most ECO Window Systems failures we handle are discovered the hard way: a window that won’t close fully, condensation trapped between the panes, or a frame that’s quietly letting coastal air through the rough opening. The good news is that a failed ECO Window Systems unit rarely means replacing every window in the house. If the frame is square and the flashing is intact, we swap the sash or the glass pack, seal it properly for Long Beach humidity, and you’re done in a single visit.
We’re an independent Long Beach window company, not affiliated with ECO Window Systems, but their hardware shows up in plenty of homes across the city from Belmont Shore to Bixby Knolls, and we keep common replacement components on the truck.
Which ECO Window Systems Models This Applies To
ECO Window Systems produces a range of vinyl and aluminum window lines, and the replacement path depends on which series is in your home. The most common we encounter in Long Beach are their single-hung and horizontal slider units, with casement windows showing up more often in newer builds. The fastest way to identify yours is the label: look for a silver or white AAMA sticker on the frame jamb or head, which lists the series, manufacturing date, and sometimes the glazing code.
The compatibility gotcha we see regularly is with the glazing bead profile. ECO Window Systems changed bead designs across series generations, and an older bead will not seat into a newer frame extrusion, even if the glass dimensions match. That means a homeowner who orders glass based on measurements alone can end up with a pane that fits the opening but will not seal. We match the bead first, then the glass.
On the OEM-versus-aftermarket question: ECO Window Systems OEM sashes preserve the factory sightline and hardware alignment. They also cost more and take longer to source. For most Long Beach homes, a quality aftermarket insulated glass unit from Mr-Glass, which is one of the eight product lines we carry, delivers the same thermal performance for less money. We tell you the price difference honestly before any work starts, because that’s how Sean Mackey built this company: clean installs and straight talk.
Signs Your ECO Window Systems Window Replacement Is Failing
- Fogging between the panes. The desiccant inside the spacer has saturated and lost its ability to absorb moisture. Once the seal fails, the insulating gas escapes and the window permanently loses thermal performance. This is the most common failure we replace in Long Beach because coastal humidity finds every failed seal eventually.
- Difficulty locking or the sash dragging when you slide it. Usually this is wear on the pivot shoe or the roller assembly, but in ECO Window Systems units it can also mean the frame has shifted slightly in the rough opening, which older Belmont Shore homes are known for. If the frame is out of square, forcing the lock is asking for a cracked corner weld.
- Draft you can feel standing three feet away. Weatherstripping on ECO Window Systems sashes compresses over time, and once it loses its rebound, air moves through freely. You’ll notice it most on west-facing windows that catch the afternoon marine layer.
- Condensation you can’t wipe off. Surface condensation you can wipe is a humidity issue. Condensation inside the glass unit means the seal is done. There is no repair for this; the glass pack gets replaced.
- Visible cracking or fading of the frame corner welds. Vinyl expands and contracts with Long Beach temperature swings, and older ECO Window Systems frames can develop stress cracks at the welded corners. If you see one, have it looked at before the crack propagates and the sash loses structural integrity.
Replacement Cost & What’s Included
In Long Beach, most ECO Window Systems window replacements land between $850 and $2,400 fully installed. A standard glass pack swap in a single-hung sits at the lower end. A full sash replacement with hardware in a casement or slider comes in higher. The three things that move the price are glass package (single-strength versus Low-E insulated with argon), frame condition (a rotted sill or out-of-square rough opening adds labor), and access (second-story or over-obstruction installations take longer).
We do not quote vaguely and adjust at the door. Every job gets a written price before work starts, covering the replacement component, labor, sealing, haul-away of the old unit, and the 365-Day Done Right Promise in writing. If the work isn’t right, we make it right for a full year. No change orders at the door, no surprise line items.
| Replacement Type | Typical Installed Range (Long Beach) |
|---|---|
| Glass pack only (seal failure) | $850 – $1,400 |
| Sash replacement with hardware | $1,200 – $1,900 |
| Full window unit (frame damage) | $1,600 – $2,400 |
DIY or Call Us?
Swapping a window sash is not a high-tension repair like a garage door spring, but it is also not a beginner DIY job. The places owners get hurt are lifting a heavy glass pack without a second set of hands and misjudging the weight once the bead releases. Glass packs can weigh thirty pounds or more, and when one slips, it shatters. That’s not a scare tactic; it’s the reason we send two technicians on every replacement.
What an owner can safely do: check the AAMA label to find your series, take rough measurements of the visible glass, and note where the draft or fogging is worst. What you should not do is attempt to de-glaze an ECO Window Systems frame to save money. The bead profile on these units does not pry out the way older wood windows do, and cracking the bead means buying a new sash anyway. Call (562) 317-8865 and we’ll bring the right part the first time.
FAQs
In Long Beach’s coastal environment, expect fifteen to twenty years from the sealed glass unit, with frames often outlasting the seals. The marine layer, salt air, and wide temperature swings between morning fog and afternoon sun age sealant faster than inland climates do. If your ECO Window Systems windows are past the fifteen-year mark and fogging, replacement is the smarter spend than chasing individual seal repairs. Call (562) 317-8865 for an honest assessment.
Hardware failures like worn rollers, pivot shoes, and locks can be repaired with replacement parts. A failed seal on the glass unit cannot be repaired; the glass pack has to be replaced because the desiccant and inert gas are gone. We will always tell you which situation you have before quoting anything.
Most single-window replacements take between one and two hours on site once the part is in hand. Sash swaps are faster. Full frame replacements with new flashing run longer. Before we start, you’ll get a written estimate that includes the time expectation so you can plan around it.
We keep common ECO Window Systems replacement components on the truck: glazing beads, pivot shoes, roller assemblies, and the Mr-Glass insulated glass units used for most replacements. Unusual sizes or series-specific OEM sashes take a few days to source. Call (562) 317-8865 with your AAMA label information and we’ll tell you what’s in stock before you book.
If you’ve got an ECO Window Systems window in Long Beach that’s foggared, drafty, or stubborn to lock, call (562) 317-8865 for a free estimate. You’ll get the price in writing before anything starts, and a real person on the line any hour of the day.
Written by Sean Mackey, Owner & Lead Installer, Juniper Windows Long Beach at Juniper Windows Long Beach, serving Long Beach and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.