New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Long Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Door Installation: The Long Beach Owner’s Guide
We stock and install Mr-Glass-compatible door hardware and glass packages for Long Beach homes, with most door installation work priced between $450 and $1,800 depending on the panel type, hardware, and frame condition. If your Mr-Glass door is sticking, sagging, or letting coastal air through the seals, we can usually match the part and get it installed within a few days of your estimate. Most Long Beach owners discover the problem the same way: the door gets harder to close as the seasons shift, or a fog line shows up between the glass panels after a wet winter.
Juniper Windows Long Beach is an independent installer and parts provider. We’re not affiliated with Mr-Glass, but we work with their door systems regularly and keep the common failure parts on hand.
Which Mr-Glass Models This Applies To
Mr-Glass door systems in Long Beach fall into two broad groups: hinged terrace doors and sliding patio doors. The hinged doors use a multi-point lock rail and adjustable hinges, while the sliders ride on a track that wears differently depending on whether you’re near the water or further inland. Compatibility comes down to three things: the glass thickness stamped on the corner of the insulated unit, the width of the door slab, and the lock rail profile. Older Mr-Glass doors from the mid-2000s used a narrower stile, so a replacement roller or hinge from a newer series won’t always seat correctly.
For the OEM versus aftermarket decision on Mr-Glass specifically: the glass units are worth sourcing as OEM when the door is under a transferable warranty or when the Low-E coating has specific tinting. Hardware, like rollers and lock sets, often has a quality aftermarket equivalent that costs 30 to 50 percent less and performs the same. We’ll tell you which route makes sense based on what’s in your door and what it’s worth spending on.
Signs Your Mr-Glass Door Installation Is Failing
- The door scrapes the threshold when you open it. This usually means the hinges or rollers are worn and the slab has dropped. On coastal Long Beach homes, salt air corrodes roller bearings faster than inland, so Belmont Shore and Naples Island doors need roller replacement more often than doors in Bixby Knolls or Los Altos.
- Condensation fogs the glass between the panes. That’s a failed seal on the insulated glass unit. Once the desiccant strip inside the spacer is saturated, the only real fix is a new glass unit. The fog gets worse as Long Beach moves between dry heat and marine layer humidity.
- The door doesn’t lock without lifting or slamming it. Misaligned multi-point locks are common as the frame settles. You can sometimes adjust the strike plates, but if the slab itself has warped, the fix is a new door slab or a full re-hang.
- Drafts around the edges on windy days. Worn weatherstripping or a frame that’s out of square lets air pass. In older Long Beach homes, especially the 1920s-1940s builds near Retro Row and Alamitos Beach, the rough opening shifts over time and the original weatherstripping never fully recovers.
- The rollers grind or the door jumps the track. On Mr-Glass sliders, this is almost always a worn or seized roller assembly. If you keep forcing it, the track gets gouged, and then you’re looking at a track replacement too.
Replacement Cost & What’s Included
Here’s what Mr-Glass door installation work typically runs in Long Beach right now:
- Sliding door roller replacement: $180 – $320 installed, parts included.
- Weatherstripping and seal replacement: $150 – $400 depending on door size and access.
- Full hardware swap (handles, lock rail, hinges): $350 – $750 installed.
- Insulated glass unit replacement in an existing Mr-Glass slab: $450 – $1,200 depending on glass size, Low-E coating, and whether it’s tempered.
- Complete Mr-Glass door slab replacement or re-hang: $900 – $1,800 installed, including disposal of the old slab.
The range comes down to the age of the door, the series, and whether the frame itself needs shimming or correction. Every quote is a written, line-item price before we start. No change orders, no surprise add-ons. The work is covered by the 365-Day Done Right Promise: parts and labor, in writing, for a full year.
DIY or Call Us?
Some things are safe to check yourself: whether the screws in the hinges are tight, whether the track is clear of debris, and whether the weatherstripping is visibly cracked. What goes wrong in DIY Mr-Glass door work is the alignment. A door that’s off by an eighth of an inch gets worse, not better, and the glass units are heavy enough that a wrong move turns a $300 job into a broken panel. If the door has sagged, if the glass is fogged, or if the lock rail isn’t seating, call us at (562) 317-8865. We’ll tell you over the phone whether it’s a quick fix or a full replacement, and the estimate is free either way.
FAQs
The frame and slab can last 20 to 30 years, but hardware like rollers and weatherstripping typically fails in 5 to 10 years on coastal Long Beach homes due to salt air and humidity. The glass seal is the mid-life risk: most insulated units hold 10 to 20 years before fog appears.
Yes, in most cases. Rollers, hinges, weatherstripping, and lock hardware are all replaceable parts. Full replacement only makes sense when the slab itself is warped, the glass seal has failed, or the frame is out of square beyond correction. We’ll show you photos of the failure before you decide. Call (562) 317-8865 for an exact diagnosis.
Most Mr-Glass door installations and hardware swaps are done in a single visit of 2 to 4 hours. Glass unit replacements take 1 to 2 hours once the unit is in hand, and we coordinate the glass order before your appointment so there’s no second trip. A full slab replacement runs a half day.
Yes. Alongside Mr-Glass, we keep common parts for PGT, CGI, and CWS door systems on our trucks. If you have a mixed-brand home, one call gets everything matched.
Call Juniper Windows Long Beach
If your Mr-Glass door isn’t closing, sealing, or locking right, let’s get it sorted. We’ll give you a written price, a live arrival time, and photos of the work when it’s done. Call (562) 317-8865 or book your free estimate online. Sean Mackey and the Juniper Windows Long Beach team serve all of Long Beach, from Naples to Bixby Knolls to the Eastside.
Written by Sean Mackey, Owner & Lead Installer, Juniper Windows Long Beach at Juniper Windows Long Beach, serving Long Beach and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.