New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Long Beach pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Sliding & Patio Doors: The Long Beach Owner’s Guide
If your Mr-Glass sliding patio door is dragging, sticking, or letting a draft through, you’re likely dealing with a failed roller assembly, worn weatherstripping, or a track that’s out of alignment. At Juniper Windows Long Beach, we stock Mr-Glass-compatible rollers, handles, locks, and weatherseal kits, and most slider repairs run $160 to $420 installed depending on the part and how much track work is involved. You’ll typically notice it first as a door that suddenly takes real muscle to move, or a whistle of air near the latch side on windy nights off Alamitos Bay.
We’re an independent Long Beach service provider, not a Mr-Glass dealer or affiliate, which means our only interest is getting the right part into your door at a fair written price. Sean Mackey has been working on Mr-Glass doors across Long Beach for over a decade, and he’ll tell you straight: most slider failures aren’t the glass. They’re the $20 parts underneath it that nobody lubricates until they grind themselves to death.
Key takeaways:
- Most Mr-Glass slider repairs run $160 to $420 installed in Long Beach
- Rollers and weatherstripping fail far more often than glass or frames
- We stock common Mr-Glass parts on the truck for same-visit fixes
- Every job gets a written price before we start, covered by the 365-Day Done Right Promise
Which Mr-Glass Models This Applies To
Mr-Glass produces sliding patio doors and window packages across several series lines, most commonly the 7000 and 8000 series aluminum sliders and the vinyl-framed VG series. The compatibility catch: roller assemblies differ between the aluminum and vinyl lines. A roller wheel that drops into a 7000 series aluminum track won’t fit the narrower channel on a VG vinyl frame, and the adjustment screw threads run in opposite directions on some production years. If you look at the edge of the door panel near the bottom corner, you’ll usually find a small etched or stickered marking with the series number.
Most replacement part matches come down to three measurements: the roller wheel diameter (typically 1-1/4 inch or 1-1/2 inch on Mr-Glass), the housing width, and the stile channel depth. We prefer OEM Mr-Glass parts when the door is under manufacturer warranty, since a warranty claim gets complicated if you’ve swapped in aftermarket hardware. Outside of warranty, a quality aftermarket roller with sealed stainless bearings often outlasts the original and costs about 30% less. The honest truth for Long Beach is that salt air and fog cycles wear out both at roughly the same rate, so we let the door’s age and warranty status drive the call.
Signs Your Mr-Glass Sliding & Patio Door Is Failing
- The door needs a shoulder to move. This is almost always a roller that’s flattened on one side or seized at the bearing. When the wheel stops rolling and starts scraping, the track gets gouged, which turns a $40 roller swap into a $300 track repair if you wait too long.
- You feel air moving around the door frame at night. Worn pile weatherstripping or a compressed fin seal lets coastal air through. In Long Beach this is especially common on west-facing doors that catch the afternoon marine breeze, and it’s why your living room feels five degrees warmer than the thermostat says.
- The latch doesn’t catch cleanly. Mr-Glass sliders are sensitive to door sag, and sag is usually a roller height issue. When one roller is lower than the other, the latch plate and strike misalign, and you end up slamming the door to get it to lock.
- The door slides back open on its own. If your door creeps open after you close it, the track has a low spot or the adjustment screws have backed out. Several Long Beach homes on older slabs, particularly in Belmont Shore and Naples, have settled enough that the header and sill are no longer perfectly parallel.
- Visible rust or corrosion on the track or roller housing. Salt air from the ocean accelerates corrosion on untreated steel components. Once the roller housing starts to flake, the wheel binds, and the door gets progressively harder to move every week.
Replacement Cost & What’s Included
Here’s what we typically see for Mr-Glass sliding door repairs across Long Beach:
| Job Type | Installed Price Range |
|---|---|
| Single roller assembly replacement (one panel) | $160 to $240 |
| Both rollers on a two-panel slider | $280 to $420 |
| Weatherstripping and seal replacement | $120 to $260 |
| Latch / handle replacement | $90 to $180 |
| Track clean, alignment, and roller adjustment | $110 to $150 |
The range depends on whether your Mr-Glass has aluminum or vinyl framing, how much track deterioration we’re dealing with, and part availability. Every quote is written out before any work starts, parts and labor broken down line by line, and that’s the price you’ll pay. No adjusters, no “we found something else.” The 365-Day Done Right Promise applies to the whole job, parts and labor, for a full year.
DIY or Call Us?
Sliding door rollers aren’t under spring tension and they’re not electrical, so the safest DIY move is a track inspection: vacuum out the bottom channel, check for gouges or dents, and look at whether the wheels are round or flattened. If the rollers themselves need to come out, that’s where we recommend you stop. The door panel is heavy, the adjustment screws are easy to strip, and without the right lift technique you’ll be holding 80 pounds of glass while trying to thread a screw that’s seized from salt corrosion. Most failed DIY roller swaps in Long Beach end with a cracked glass panel or a call to us anyway, now with a bigger invoice.
If you’re not sure whether it’s a roller, a track issue, or a frame alignment problem, call (562) 317-8865 and describe what you’re seeing. We’ll give you a realistic idea of cost over the phone, and the on-site estimate is free.
FAQs
Rollers on Mr-Glass sliding doors typically last 8 to 12 years in Long Beach’s coastal climate, though doors within a mile of the ocean often need roller replacement closer to the 6 to 8 year mark due to salt and moisture. The original equipment rollers are usually unsealed bearings, and once salt air gets into the bearing race, it’s a slow grind to failure. Call (562) 317-8865 if your door is getting harder to move, and we’ll tell you if it’s a roller or a track issue.
No, and this is one place we never cut corners. A roller with a flat spot or a seized bearing is done; no amount of lubrication brings back a wheel that’s worn through its outer shell. The good news is that replacement is a fast job and the parts are relatively inexpensive compared to letting it go and destroying the track. Call (562) 317-8865 for an exact price on your model.
A typical single-panel Mr-Glass roller replacement takes 45 to 90 minutes on site. If we’re doing both rollers, realigning the track, and replacing weatherstripping on a two-panel unit, plan for about two hours. We’ll give you a written estimate before we start and a digital invoice after, so you can see exactly what was done.
We keep common Mr-Glass roller assemblies, weatherseal profiles, and latch hardware on the truck for the 7000, 8000, and VG series. If your specific production year has an unusual roller housing or a discontinued seal profile, we source the OEM part and have it within a few days. We also stock compatible parts for PGT, CGI, and CWS sliding door lines, since those are fairly common in Long Beach homes as well.
Get Your Mr-Glass Sliding Door Moving Again
If your Mr-Glass sliding or patio door is dragging, leaking air, or refusing to latch, don’t wait until the track is damaged or the glass is at risk. Call Juniper Windows Long Beach at (562) 317-8865 and we’ll set up a free estimate with a written price before anything gets touched. Sean Mackey and the team handle Mr-Glass repairs across Long Beach every week, from Belmont Shore to Bixby Knolls, and we treat your door like it’s on our own house. Good windows don’t whisper – they seal, insulate, and stay quiet for twenty years. We’ll make sure your slider does exactly that.
Written by Sean Mackey, Owner & Lead Installer, Juniper Windows Long Beach at Juniper Windows Long Beach, serving Long Beach and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.