ES Windows Window Installation Nationwide

ES Windows Window Installation: The Long Beach Owner’s Guide

If you have an ES Windows unit that needs to be installed, matched, or replaced in Long Beach, we install ES Windows-compatible window installation starting at $185 per window for a standard swap, with most full installs landing between $425 and $1,150 depending on size, frame condition, and whether we’re working on the first or second floor. We carry ES Windows-compatible hardware and weatherstripping on our trucks, so most jobs are done in a single visit. You’ll usually discover you need this work after noticing a draft, a sash that won’t stay up, condensation between the panes, or water staining around the frame after a coastal rain.

Call (562) 317-8865

Key takeaways:

• We install and replace ES Windows units in Long Beach, including parts-matched hardware.
• Most installs run $425 – $1,150 fully installed; hardware-only repairs start around $185.
• We’re an independent installer, not affiliated with ES Windows, so we match parts across series without brand-channel pricing.
• Written price before work starts, backed by our 365-Day Done Right Promise.

Which ES Windows Models This Applies To

ES Windows builds aluminum and thermally-broken frame systems, and the hardware differs by series. In Long Beach, the most common units we see are the ES7000 and ES8000 series, widely used in condo and townhome projects from Belmont Shore to Bixby Knolls. The ES7000 uses a narrower, lighter frame and smaller balance assemblies. The ES8000 is the heavy-duty line, built for wider spans and larger glass loads, with a beefier sill track and thicker wall profile. Parts don’t always cross between the two.

Here’s the compatibility gotcha we run into weekly: a window labeled ES Windows may have been fabricated years apart from the label’s series code, and the balance or roller hardware can differ by production run even within the same series. That’s why we pull the sash, check the corner hardware stamps, measure the balance length and weight rating, and only then match the part. On older ES7000 units, OEM balances are often discontinued; a quality aftermarket equivalent with the same spring weight and travel length performs as well, and we’ll tell you upfront which one we’re quoting and why. Newer ES8000 units can almost always take OEM or direct-fit parts without issue.

Signs Your ES Windows Window Installation Is Failing

Long Beach’s combination of salt air, direct sun, and temperature swings is tough on aluminum frames and rubber weatherstripping. If you’re noticing any of the following, the window is telling you something:

• Drafts even when closed. The weatherstripping along the sash has compressed or degraded, particularly if the window gets afternoon sun from the west. Long Beach ocean air accelerates rubber breakdown; we regularly replace weatherstripping on windows less than 10 years old in coastal buildings.
• Sash that drops or slams. The balance springs have lost tension or separated from the pivot points. This is a mechanical failure, not something that re-tightening a screw will fix for long.
• Hard-to-turn crank or stiff slider. The operator gears are worn or the track is fouled with silt and salt grit. Aluminum tracks in Long Beach collect more airborne salt than you’d expect, and it acts like sandpaper on rollers.
• Fog or condensation between the glass. The sealed unit has failed. In a coastal climate, failed seals pull moisture in and leave mineral film on the interior glass. It’s not just cosmetic; your insulating value is gone.
• Water staining at the corners. Weep holes are clogged or the sill flashing was never pitched right on the original install. This is the most common one we see in older Long Beach homes and condos, and the fix requires pulling the window to do it correctly.

Replacement Cost & What’s Included

For Long Beach, expect to budget this way:

• Hardware-only replacement (balance, roller, operator): $185 – $410 per window, parts and labor.
• Full window installation into an existing opening: $425 – $850 for standard-sized ES Windows-compatible units.
• Large or complex units (oversized, second floor, stucco, rot repair around the opening): $800 – $1,150.

Every quote is written, and the price doesn’t change once the job starts, period. That’s part of the Relay Visibility Guarantee and the 365-Day Done Right Promise: you get a written price before anything begins, and if the work isn’t right, we fix it for a full year, parts and labor. No vague “estimate” that turns into a surprise invoice.

DIY or Call Us?

If you want to check the obvious, here’s what a homeowner can safely do: look for cracked weatherstripping, note whether the sash sits level through its travel, and check for visible gunk in the sill track. Cleaning a track with mild soap and a brush is fine. What we’d advise against is pulling the sash on an ES Windows unit and trying to swap a balance assembly yourself. Balance springs are under tension, and a wrong release can catch fingers and fly back. It’s not worth a hand injury or a shattered sash.

If the window is out of alignment, the frame was installed wrong, or the hardware has failed mechanically, that’s where we come in. Call us at (562) 317-8865 and we’ll give you an honest read over the phone.

FAQs