PGT Door Replacement Nationwide

PGT Door Replacement in Long Beach: What to Know First

PGT door replacement in Long Beach typically runs $1,850 to $4,200 for a standard single door, including tear-out, new slab and frame, hardware, and weather sealing. Most jobs are done in a single day once the door arrives. We quote a written price before any work starts, so the number on your estimate is the number you pay.

Call (562) 317-8865

This page is for Long Beach homeowners who already own PGT doors or are considering PGT for a replacement. We’re an independent PGT service provider, not a factory-authorized dealer, which means we give you straight answers about what will actually hold up in coastal air. If your PGT door is sagging, sticking, or leaking, call our team at (562) 317-8865.

How PGT Products Fail and How We Fix Them

• PGT WinGuard sliding glass doors: roller failure from salt air. Long Beach humidity carries salt, and those rollers corrode faster than PGT’s inland lifecycle charts suggest. Homeowners in Belmont Shore and Naples tell us the door slides fine for five or six years, then starts grinding. We replace the roller assembly and realign the track so the door glides instead of fighting you.
• PGT Series 5500 French doors: sagging hinges on the active panel. These are heavy doors. Over time, the hinge-side frame settles and the active door sags just enough to drag on the threshold. Rather than sanding the door bottom like some handymen will, we reset the hinges, shim the frame correctly, and re-square the opening so the reveal is even around all four sides.
• PGT impact-rated entry doors: worn compression weatherstripping. Impact doors rely on that airtight seal to keep the pressure rating honest. After several Long Beach summers of direct sun, the weatherstripping compresses and the door loses its seal. We replace the compression strips with fresh material that matches the original profile, so your door keeps its impact integrity and your AC stays inside.
• PGT aluminum frame doors: oxidation at the threshold. Aluminum frames hold up well, but where salt spray pools at the bottom track, we see pitting and corrosion, especially in homes within a mile of the water. We replace the threshold, treat the frame for corrosion, and install a marine-grade sealant designed for exactly this exposure.
• PGT vinyl sliding doors: cracked reveals from rough handling during original installation. Sometimes the issue isn’t age, it’s the original install. We see vinyl frames with hairline cracks at the corners where someone forced the frame into an undersized rough opening. We pull the door, correct the opening dimensions, and set the new unit so no part of the frame is under tension.

Our PGT Door Replacement Process

1. 1
   Book the inspection. Call us at (562) 317-8865 or tap on our site. You get a live arrival time you can track, just like a rideshare. A real person answers the phone 24/7.
2. 2
   We measure and diagnose. Sean Mackey or one of our background-checked techs comes out, measures the rough opening, checks the square, and tells you exactly what failed and why. No mystery, no vague talk.
3. 3
   Written price before anything happens. You get a line-item quote covering the door, parts, labor, and disposal. That price does not change once work begins. If your situation calls for PGT OEM parts, we source them. If a quality aftermarket option fits better for your budget, we tell you what it is and why.
4. 4
   Install day. We remove the old door, correct any rough opening issues, set the new PGT unit level and square, flash the perimeter, and install new weatherstripping and hardware.
5. 5
   We test it in front of you. Open, close, lock, seal check. You see the door work before we leave. We take before-and-after photos for your records.
6. 6
   365-Day Done Right Promise. Every PGT door replacement is covered for 365 days, parts and labor, in writing. If something isn’t right, we make it right, including a free second visit.

What PGT Door Replacement Costs in Long Beach

Most PGT door replacements we do in Long Beach fall between $1,850 and $4,200 for a standard single door. Here is how that breaks down:

• Basic PGT single entry door, vinyl or aluminum frame: $1,850 to $2,600
• PGT impact-rated entry door, full frame replacement: $2,800 to $4,200
• PGT sliding glass door replacement (standard size): $2,400 to $5,800 depending on glass package and frame material
• PGT French door replacement (two-panel): $3,200 to $6,900

What moves the price: impact-rated glazing, custom sizing, frame material, hardware grade, and how much rough opening correction the opening needs. Older Long Beach homes, particularly in Belmont Shore and Alamitos Beach, often need extra framing work because the original opening has shifted. You will know your exact number before we start. Call (562) 317-8865 for a free estimate.

Why Long Beach Homeowners Call Juniper Windows Long Beach for PGT Work

We are a windows-and-doors specialist inside the Relay Home Co. family and we have been doing this since 2001. Our techs install PGT doors the way they would want them installed at their own homes, which means flashing details done right, frames set square, and no surprises on the invoice. Every job gets a written price before work starts and falls under the 365-Day Done Right Promise. That promise is in writing: 365 days, parts and labor. If it is not done right, we make it right.

If a PGT unit is not the best fit for your home or budget, we also carry CGI, CWS, ES Windows, and ECO Window Systems. That means you get a recommendation based on what actually works for a Long Beach house, not what one manufacturer happens to sell. The Relay Standard applies to every job: book in a tap, live arrival time, before-and-after photos, written price, digital invoice.

FAQs